SERPENT ERYX 4.0 1/10 TC introduction

Rp 7.500.000,-
PREORDER
 
 
 
 
 

Serpent  ERYX 4.0  introduction

The Serpent ERYX ERYX 4.0 is the next big  development stage for the 411 platform.   Featuring an ultra low centre of gravity, optimized weight distribution, high performance geometry and top quality materials throughout, the ERYX is your car for personal best times !
 


Michael Salven the Serpent chief onroad designer has worked intensively over summer  with  Marc Fischer and Viktor Wilck to  develop the 4.0  new parts. Most of the testing was done by Marc and Viktor and the parts have been used in recent races already.

The Eryx 4.0 ships december 2015 worldwide onwards.
 


Key new items in the  ERYX 4.0
- choice of chassis depend on version of choice :  
- new 2mm coated and laser engraved 7075 T6 aluminium chassis; dark grey anodised with ERYX logo, lowered machined sides for optimal flex and lower CG, fully symmetrical for even flex
- new 2.25mm carbon fibre chassis fully symmetrical for even flex
- completely new shocksabsorbers; housing, lower cap, x-rings, machined bushings, shockrods, shockcaps, membrames
-  2mm higher front carbon shocktowers to mount the new shocks
- 2mm higher rear carbon shocktowers to mount the new shocks
- completely new mid-shaft pulley system with playfree assembly, one screw fixture
- new type one piece lower CG 7075 T6 motormount, centraly mounted
- adjustable carbon/alu battery supports to move battery front or back precisely, easily and securely
-  steering-set with wider pivot system for more direct response
- improved diff gears for super smooth  diff action
- New Onine PDF  manual and ERYX 4.0 set-up sheet
 


New optionals
- rear lower suspensionpin mounts in 0.5 and  1.5, prepared to to be used with the innovative Reactive Rear Steering System

Other key main specs
- Serpent springsteel front Double Joint Cardan shafts
- hard compound moulded suspension parts
- ball raced anti-roll bars
- centrally mounted servo-mount, lowest cg
- low friction belts and supertrue low friction pullies


Full info on the new cars:

Eryx 4.0 alu
http://serpent.com/product/400017/

Eryx 4.0 carbon
http://serpent.com/product/400018/




*Qty

+

PREORDER
 
 
 
 
 

Serpent  ERYX 4.0  introduction

The Serpent ERYX ERYX 4.0 is the next big  development stage for the 411 platform.   Featuring an ultra low centre of gravity, optimized weight distribution, high performance geometry and top quality materials throughout, the ERYX is your car for personal best times !
 


Michael Salven the Serpent chief onroad designer has worked intensively over summer  with  Marc Fischer and Viktor Wilck to  develop the 4.0  new parts. Most of the testing was done by Marc and Viktor and the parts have been used in recent races already.

The Eryx 4.0 ships december 2015 worldwide onwards.
 


Key new items in the  ERYX 4.0
- choice of chassis depend on version of choice :  
- new 2mm coated and laser engraved 7075 T6 aluminium chassis; dark grey anodised with ERYX logo, lowered machined sides for optimal flex and lower CG, fully symmetrical for even flex
- new 2.25mm carbon fibre chassis fully symmetrical for even flex
- completely new shocksabsorbers; housing, lower cap, x-rings, machined bushings, shockrods, shockcaps, membrames
-  2mm higher front carbon shocktowers to mount the new shocks
- 2mm higher rear carbon shocktowers to mount the new shocks
- completely new mid-shaft pulley system with playfree assembly, one screw fixture
- new type one piece lower CG 7075 T6 motormount, centraly mounted
- adjustable carbon/alu battery supports to move battery front or back precisely, easily and securely
-  steering-set with wider pivot system for more direct response
- improved diff gears for super smooth  diff action
- New Onine PDF  manual and ERYX 4.0 set-up sheet
 


New optionals
- rear lower suspensionpin mounts in 0.5 and  1.5, prepared to to be used with the innovative Reactive Rear Steering System

Other key main specs
- Serpent springsteel front Double Joint Cardan shafts
- hard compound moulded suspension parts
- ball raced anti-roll bars
- centrally mounted servo-mount, lowest cg
- low friction belts and supertrue low friction pullies


Full info on the new cars:

Eryx 4.0 alu
http://serpent.com/product/400017/

Eryx 4.0 carbon
http://serpent.com/product/400018/